fredag den 29. maj 2015

Mapillary going high

How do you map busy pedestrian street, when you only got the time when there are lots of people? Go high! Raising the camera above the crowd prevents them from blocking the view.

The result was pretty nice:
(sequence cut requested - I had split it but used the script wrong)

Please ignore the rain drop. This was as much an experiment as a real series, so everything is not perfect.

Setup

I used a small flash light stand and a tripod head to mount the camera to it. Using strips I tied the light stand to my bike and walked through the street.

In reality you could use a metal rod and a role bar mount of an action camera or some tape. I just happen to have a light stand, no rod and the stand can be collapsed to take up much less space.e

It took less than 3 minutes to assemble when I had found the materials in my house. Due to the light stand it is very portable. Such cheap light stands are frequently sold for around €40 and up. The tripod head is more expensive, because it is professional quality.

It looked like this:
The camera is raised a little more than 2 meters above the ground. The stand was tied to the bike using only two strips:
The 3 strips that are tied together in the top does not hold the stand, but I had to leave the bike parked on the street, so I kept them for added theft prevention. There is not a lot of theft in Denmark :-)

The tripod head on the top made the job easier for me. It could only tilt, but then I did not have to tie the stand 100% perfectly and it let me adjust the tilt. In the same way the stand let me easily adjust the height.


Height of the camera

I put the camera a little more than 2 meters above the ground. I think the images would be better if it was a little lower so it does not point into the ground. When I tried that, I got these images:
The head in the bottom is present on all of the images. The head is mine, and even though I just got a fresh hair cut, it should not be present on Mapillary series.

Walking or biking

I did not try to ride the bike with this setup. It would cause several problems.

Any bike mounted camera must be mounted firmly so the camera will not shake too much. Every time the bike shakes, anything that is loose will vibrate like a guitar string. All that fast camera movement gives a lot of motion blur. Due to the strips and the joints of the light stand, there is way too much movement in this setup. Further more the long distance from the bike will amplify any shake a lot.

My action camera can via wifi transmit its latest picture to my phone, which I had mounted on my arm. In this way I made sure the image did not tilt too much. That was not easy. When riding a bike, it will tilt from side to side all the time. This will be amplified by the long rod / light stand making most images unusable.


Multi camera

My plan was to use my Finn smartphone mount to mount an old phone to get images in the forward direction while my lower resolution action cam would get images from behind. That would also have allowed me to lower the setup a bit. Unfortunately it was raining too much to work that day. The action cam is splash proof, the phone is not.

onsdag den 20. maj 2015

Photographing: Car - The trouble the trouble

We always want to show an image without ourselves or our equipment in the frame. When shooting from a car, that is difficult partly due to mounting on the slanted window and partly due to the wide angle lenses on mobile phones and action cameras.

Because the window in a car is heavily slanted, it is hard or impossible to get the phone really close to the window. Add that most mobile phones and action cameras have very wide angle lenses and it is hard to place the phone or camera on the right spot, where you will not get anything but the car window in the frame.

In this trip:

http://www.mapillary.com/map/im/hkLHFyLqj1q4aGH7ETVfoQ

I really tried hard to get it right. 
I put a finger in the edge of the picture and followed the picture edge all the way around on the car window. I even added extra space. It was perfect!

But no. you can see a slight bit of the dash board and a parking license in the bottom of the frame. It is not worse, because I cropped the pictures afterwards. Fortunately I had set the phone to full resolution and not just low resolution.

You still see part of the dash board which is lit by the Sun. With all that glass and the camera placed in that way, there is not much to do. The dash board is black, so not even putting gaffers tape on shiny parts would help here.

In general pictures from within a car are not great. If you try hard to avoid photographing the car, some of them will be pretty decent while others will suffer from the Sun. You have to get the camera into free air to get good pictures. In a car, that is often not safe to do.


søndag den 17. maj 2015

Photographing: Car

Photographing from a car lets you map large distances. As always, it presents its own challenges.

Mounting

You can get tons of cheap mounts for both smart phones and action cams. They usually use a suction cup. Some of them are nice and others are not.

Make sure to put the mount on a clean spot and use all of your strengths to mount it as securely as possible. If you have a power cable attached, make sure it will not interfere with your driving.

Framing

Framing is not easy. Here I really tried to mount the phone well:
You have to look in the edges of the picture. Check and recheck.

Image quality

The Sun may shine on you and it will not produce pretty pictures:
It is impossible to completely avoid sun and shadows when shooting from within a car. In general: Live with it. On the following picture, the white camera (what a fool makes a white camera...ohh, yes: Sony) can be seen:
If you have a non black camera, put some black tape over the white.

lørdag den 16. maj 2015

Photographing: Biking with an action cam

As I wrote in the previous post, I gave up using my Nexus 5 smartphone on a bike due to rolling shutter blur. Fortunately I had an action camera.

It is a Sony, but I will not recommend it. When setting it on time lapse, it will only take pictures at about 2 mega pixels, but when I press the shutter myself it is capable of 13 mega pixels. There is no good explanation for this: Shame on you, Sony!

That being said, the camera does not suffer from any rolling shutter blur and can take the beating of being mounted on a bike.

2 cameras?

I have only thought of this, but mounting a camera in the front and back of your bike, will cover what you shoot from more angles.

Challenges

Of cause there are challenges!

First of all, action cameras usually have very wide angle lenses. Most often corresponding to a 20 mm lens on a full frame DSLR. This gives a heavy distortion:
A wide lens is also a good ting: You can see a lot and it takes more shaking of the camera to get motion blur.

Mounting the camera physically is usually easy. You can get special mounts for most camera or get some universal light mount.

When mounting the camera, make sure you cannot see the bike or your hands. The wide angle lens may present you with a challenge here. Also note that the camera will be mounted less than a meter above ground. A higher mount point will get better pictures.

You can also mount the camera on your head. That makes it harder to keep a good frame and if you have to turn you head a lot of check for traffic, you will manually have to delete images afterwards.

Remember to always enable the GPS of the camera before starting and make sure it has a signal. Pictures without locations will be rejected after upload.

Manual upload

fredag den 15. maj 2015

Photographing: Biking with a smartphone

Mounting
There are tons of cheap mounts for either specific smart phones or universal. Put a couple of rubber bands on them, and they will probably hold your phone just fine.

Shooting with smartphone on a bike

You can mount a camera on your bike and quickly cover a lot that cars cannot cover. It present several challenges:

First keep in mind, that most of them will now allow you to point the camera forward with the phone in landscape mode. In some cases you may achieve this by fiddling with some metal and screws.

Then note that a bicycle is shaking a lot, even when driving on new asphalt. Your phone will get a good shaking, Even if this is ok for you, the picture might get motion blur for big bumps, but most images may get rolling shutter blur. What is that?
http://www.mapillary.com/map/im/uSgIn-XdK8Ft3g_GKAWsIA
Note that part of the images is blurred and part of it is not.
Most cameras does not take a picture in a single instant, but reads it one picxel at the time. Depending on how good the camera is, this may create an artefact called rolling shutter. Most often you see it on really cheap video cameras in phones.

The image above is taken with my Google Nexus 5, which is not cheap and have a good camera. But it is no good on a bike. Some phones might be less prone to this problem. 

If you have a bike with adjustable shock absorbers, you can set them on the softest setting and it might help. You can also let as much air out of your tires as possible, but make sure not to let too much out. That will ruin the tires! Also note that you will get a flat much more easy with low air pressure.

torsdag den 14. maj 2015

Photographing: Walking

When walking you can do it in 3 ways:

In manual mode you have to press the shutter button for every picture. That ensure that you have a properly framed picture and is holding the camera level and still.

In auto mode, the app will grab a picture e.g. every 2 seconds. It is more relaxing, but you have to stay focused frame every picture well. You should only use this if there is enough light, so your images will not get motion blur like on this picture:


When using another camera, you can use everything from a point and shoot to a DSLR. Just remember: You must have a detailed GPS track of where you went and software to geo tag every image! See how to upload manually.

onsdag den 13. maj 2015

How to map

You can map in many ways. The easiest way to start is to download the Mapillary app to your phone and walk around. It is possible to mount a phone to a bike, but I would recommend an action camera for that. You can also mount it in your car to cover long stretches.

But you can also place the camera other places. I have yet to see it mounted on a boat to map waterways. That would be awesome!