The result was pretty nice:
(sequence cut requested - I had split it but used the script wrong)
Setup
I used a small flash light stand and a tripod head to mount the camera to it. Using strips I tied the light stand to my bike and walked through the street.In reality you could use a metal rod and a role bar mount of an action camera or some tape. I just happen to have a light stand, no rod and the stand can be collapsed to take up much less space.e
It took less than 3 minutes to assemble when I had found the materials in my house. Due to the light stand it is very portable. Such cheap light stands are frequently sold for around €40 and up. The tripod head is more expensive, because it is professional quality.
It looked like this:
The camera is raised a little more than 2 meters above the ground. The stand was tied to the bike using only two strips:
The 3 strips that are tied together in the top does not hold the stand, but I had to leave the bike parked on the street, so I kept them for added theft prevention. There is not a lot of theft in Denmark :-)
The tripod head on the top made the job easier for me. It could only tilt, but then I did not have to tie the stand 100% perfectly and it let me adjust the tilt. In the same way the stand let me easily adjust the height.
Height of the camera
I put the camera a little more than 2 meters above the ground. I think the images would be better if it was a little lower so it does not point into the ground. When I tried that, I got these images:
The head in the bottom is present on all of the images. The head is mine, and even though I just got a fresh hair cut, it should not be present on Mapillary series.
Walking or biking
I did not try to ride the bike with this setup. It would cause several problems.
Any bike mounted camera must be mounted firmly so the camera will not shake too much. Every time the bike shakes, anything that is loose will vibrate like a guitar string. All that fast camera movement gives a lot of motion blur. Due to the strips and the joints of the light stand, there is way too much movement in this setup. Further more the long distance from the bike will amplify any shake a lot.
My action camera can via wifi transmit its latest picture to my phone, which I had mounted on my arm. In this way I made sure the image did not tilt too much. That was not easy. When riding a bike, it will tilt from side to side all the time. This will be amplified by the long rod / light stand making most images unusable.
Multi camera
My plan was to use my Finn smartphone mount to mount an old phone to get images in the forward direction while my lower resolution action cam would get images from behind. That would also have allowed me to lower the setup a bit. Unfortunately it was raining too much to work that day. The action cam is splash proof, the phone is not.
Ingen kommentarer:
Send en kommentar