lørdag den 16. maj 2015

Photographing: Biking with an action cam

As I wrote in the previous post, I gave up using my Nexus 5 smartphone on a bike due to rolling shutter blur. Fortunately I had an action camera.

It is a Sony, but I will not recommend it. When setting it on time lapse, it will only take pictures at about 2 mega pixels, but when I press the shutter myself it is capable of 13 mega pixels. There is no good explanation for this: Shame on you, Sony!

That being said, the camera does not suffer from any rolling shutter blur and can take the beating of being mounted on a bike.

2 cameras?

I have only thought of this, but mounting a camera in the front and back of your bike, will cover what you shoot from more angles.

Challenges

Of cause there are challenges!

First of all, action cameras usually have very wide angle lenses. Most often corresponding to a 20 mm lens on a full frame DSLR. This gives a heavy distortion:
A wide lens is also a good ting: You can see a lot and it takes more shaking of the camera to get motion blur.

Mounting the camera physically is usually easy. You can get special mounts for most camera or get some universal light mount.

When mounting the camera, make sure you cannot see the bike or your hands. The wide angle lens may present you with a challenge here. Also note that the camera will be mounted less than a meter above ground. A higher mount point will get better pictures.

You can also mount the camera on your head. That makes it harder to keep a good frame and if you have to turn you head a lot of check for traffic, you will manually have to delete images afterwards.

Remember to always enable the GPS of the camera before starting and make sure it has a signal. Pictures without locations will be rejected after upload.

Manual upload

Ingen kommentarer:

Send en kommentar